Conquer Club

Map-Making Q&A

How to make a map. Official Handbook, Guides, Tutorials and more...

Moderator: Cartographers

Forum rules
Please read the Community Guidelines before posting.

Program

Postby Koronna on Wed Aug 29, 2007 5:25 pm

Hey, I've made draft of a periodic Table Map using MS paint. I was wondering if anyoen could suggest a free graphic program that I could possiblely use to make my map? Some program you can download off the internet and is user friendly? thanks a lot guys i'm new to map making and I need your help to make this map come true. Again, any program that you suggest?
User avatar
Private 1st Class Koronna
 
Posts: 88
Joined: Wed Mar 28, 2007 6:49 pm

Re: Program

Postby DiM on Wed Aug 29, 2007 6:59 pm

Koronna wrote:Hey, I've made draft of a periodic Table Map using MS paint. I was wondering if anyoen could suggest a free graphic program that I could possiblely use to make my map? Some program you can download off the internet and is user friendly? thanks a lot guys i'm new to map making and I need your help to make this map come true. Again, any program that you suggest?


gimp and inkscape are free

fireworks and photoshop each have 30 day trial periods.

i personally recommend fireworks 8 or photoshop cs3.
“In the beginning God said, the four-dimensional divergence of an antisymmetric, second rank tensor equals zero, and there was light, and it was good. And on the seventh day he rested.”- Michio Kaku
User avatar
Major DiM
 
Posts: 10415
Joined: Wed Feb 14, 2007 6:20 pm
Location: making maps for scooby snacks

Postby lt_oddball on Fri Sep 14, 2007 7:06 am

Past days were busy..but now I have more free time at hand , and I want to give another shot into mapmaking.

I need your advice on tackling the following problems:

1) I want to create a new Pattern (grassfield landscape from a photo but coulered a bit) which I must import in a drawing program so that after I have drawn the boundary of an area , I am able to fill it up (you know the tilted paint can) with this self created pattern.

I'd prefer to work with Inkscape (so easy & straightforward) ... but I can't seem to change the standard fill colours...and there are no patterns (like in photoshop).
EDIT: FOUND THE TOOL IN INKSCAPE ITSELF: SOLVED


2) I want to take/select an object from a photo (a bridge). Isolate it and be able to edit it (add colour or lines, turn , twist, stretch it). and then be able to place it in a map (in Inkscape).
The magic Wand of photoshop is erratic as it never gets the precise bridge (with all the pilons).
EDIT: ALSO FOUND OUT ABOUT IT

3) I want to use different Fonts than standard. I have found a website with lovely fonts. How do I import a *.ttf file in Inkscape ?


Ok.. so much for now.

PS I have the ancient photoshop 7... :roll:
User avatar
Major lt_oddball
 
Posts: 364
Joined: Mon Mar 05, 2007 11:17 am
Location: Fortress Europe

Postby DiM on Wed Sep 19, 2007 9:53 am

lt_oddball wrote:3) I want to use different Fonts than standard. I have found a website with lovely fonts. How do I import a *.ttf file in Inkscape ?



just copy the ttf file in c:/windows/fonts
“In the beginning God said, the four-dimensional divergence of an antisymmetric, second rank tensor equals zero, and there was light, and it was good. And on the seventh day he rested.”- Michio Kaku
User avatar
Major DiM
 
Posts: 10415
Joined: Wed Feb 14, 2007 6:20 pm
Location: making maps for scooby snacks

Postby lt_oddball on Wed Sep 26, 2007 8:31 am

DiM wrote:
lt_oddball wrote:3) I want to use different Fonts than standard. I have found a website with lovely fonts. How do I import a *.ttf file in Inkscape ?



just copy the ttf file in c:/windows/fonts


that's what I thought, but I get this strange windows error message like "font already in use..cannot paste here".
And I have closed the Word application..so I have no idea what is troubling it.
Will try again at new PC start up.
User avatar
Major lt_oddball
 
Posts: 364
Joined: Mon Mar 05, 2007 11:17 am
Location: Fortress Europe

Postby DiM on Wed Sep 26, 2007 11:05 am

lt_oddball wrote:
DiM wrote:
lt_oddball wrote:3) I want to use different Fonts than standard. I have found a website with lovely fonts. How do I import a *.ttf file in Inkscape ?



just copy the ttf file in c:/windows/fonts


that's what I thought, but I get this strange windows error message like "font already in use..cannot paste here".
And I have closed the Word application..so I have no idea what is troubling it.
Will try again at new PC start up.


strange. try closing any open applications and then copy it.
or better yet. close all applications restart then copy to avoid the font remaining hanged on an app.
“In the beginning God said, the four-dimensional divergence of an antisymmetric, second rank tensor equals zero, and there was light, and it was good. And on the seventh day he rested.”- Michio Kaku
User avatar
Major DiM
 
Posts: 10415
Joined: Wed Feb 14, 2007 6:20 pm
Location: making maps for scooby snacks

Text

Postby Koronna on Thu Sep 27, 2007 4:27 pm

hey, I'm right now using a combination of GIMP and Inkscape for my map, bascially INkscape for the text and GIMP for graphics. However, I find a problem with converting files smoothly from one to the other. I use Inkscape for text only for it's capbility to allow me to edit the fonts, colours, and sizes of the text, and yet that only works for INkscape's .svg files I think. I'll need to do some editing on GIMP with my map soon (which is currently in Inkscape) and I'm afraid that once I export the file I can't go back to edit the text in Inkscape later. How can I solve this problem? And how do you other map makers edit your text without having to rewrite them?
User avatar
Private 1st Class Koronna
 
Posts: 88
Joined: Wed Mar 28, 2007 6:49 pm

Postby Koronna on Thu Sep 27, 2007 4:29 pm

hey, I'm right now using a combination of GIMP and Inkscape for my map, bascially INkscape for the text and GIMP for graphics. However, I find a problem with converting files smoothly from one to the other. I use Inkscape for text only for it's capbility to allow me to edit the fonts, colours, and sizes of the text, and yet that only works for INkscape's .svg files I think. I'll need to do some editing on GIMP with my map soon (which is currently in Inkscape) and I'm afraid that once I export the file I can't go back to edit the text in Inkscape later. How can I solve this problem? And how do you other map makers edit your text without having to rewrite them?
User avatar
Private 1st Class Koronna
 
Posts: 88
Joined: Wed Mar 28, 2007 6:49 pm

Postby gimil on Thu Sep 27, 2007 10:30 pm

save the file as a layered document, or a large file document i think its also called. This keeps the layer setting but without the need to open it wih only one graphic software

P.S. this should be moved to maps TTT
What do you know about map making, bitch?

natty_dread wrote:I was wrong


Top Score:2403
User avatar
Corporal 1st Class gimil
 
Posts: 8599
Joined: Sat Mar 03, 2007 12:42 pm
Location: United Kingdom (Scotland)

Postby reverend_kyle on Thu Sep 27, 2007 10:32 pm

Get adobe creative suite, it has illustrator and photoshop. and photoshop is keen on doing everything you need for maps.
DANCING MUSTARD FOR POOP IN '08!
User avatar
Sergeant reverend_kyle
 
Posts: 9250
Joined: Tue Mar 21, 2006 4:08 pm
Location: 1000 post club

Postby lt_oddball on Fri Sep 28, 2007 9:10 am

DiM wrote:
lt_oddball wrote:
DiM wrote:
lt_oddball wrote:3) I want to use different Fonts than standard. I have found a website with lovely fonts. How do I import a *.ttf file in Inkscape ?



just copy the ttf file in c:/windows/fonts


that's what I thought, but I get this strange windows error message like "font already in use..cannot paste here".
And I have closed the Word application..so I have no idea what is troubling it.
Will try again at new PC start up.


strange. try closing any open applications and then copy it.
or better yet. close all applications restart then copy to avoid the font remaining hanged on an app.


I did a different thing: immediately unzip the zipped font into target c:/windows/fonts.
That placed the fantasy.ttf there, but still upon opening Inkscape I can't find /select it from the inkscape fonts selector.
As a matter of fact, there are much more fonts in windows/fonts than in the Inkscape collection. So I guess Inkscape is not picking them from there.
Or maybe it does but only for a prespecified selected few... so I need to break that open, i guess. :roll:
User avatar
Major lt_oddball
 
Posts: 364
Joined: Mon Mar 05, 2007 11:17 am
Location: Fortress Europe

Postby DiM on Fri Sep 28, 2007 9:16 am

do something else. open the fonts folder and inkscape.

now drag and drop the font file from the folder to inkscape. that should do the trick. it works in photoshop
“In the beginning God said, the four-dimensional divergence of an antisymmetric, second rank tensor equals zero, and there was light, and it was good. And on the seventh day he rested.”- Michio Kaku
User avatar
Major DiM
 
Posts: 10415
Joined: Wed Feb 14, 2007 6:20 pm
Location: making maps for scooby snacks

Postby lt_oddball on Fri Sep 28, 2007 4:24 pm

DiM wrote:do something else. open the fonts folder and inkscape.

now drag and drop the font file from the folder to inkscape. that should do the trick. it works in photoshop


YESS! that did the trick!
Thanx.

By the way, I noticed that this fantasy font is labelled as a True Type Font icon "TT" whereas many standard others in windows/fonts are "open type font" with icon "O".
Maybe that explains the difference of being automatically noticed or not ?
User avatar
Major lt_oddball
 
Posts: 364
Joined: Mon Mar 05, 2007 11:17 am
Location: Fortress Europe

Postby DiM on Fri Sep 28, 2007 4:29 pm

lt_oddball wrote:
DiM wrote:do something else. open the fonts folder and inkscape.

now drag and drop the font file from the folder to inkscape. that should do the trick. it works in photoshop


YESS! that did the trick!
Thanx.

By the way, I noticed that this fantasy font is labelled as a True Type Font icon "TT" whereas many standard others in windows/fonts are "open type font" with icon "O".
Maybe that explains the difference of being automatically noticed or not ?


you're welcome. and yes that could be it.
“In the beginning God said, the four-dimensional divergence of an antisymmetric, second rank tensor equals zero, and there was light, and it was good. And on the seventh day he rested.”- Michio Kaku
User avatar
Major DiM
 
Posts: 10415
Joined: Wed Feb 14, 2007 6:20 pm
Location: making maps for scooby snacks

Postby Koronna on Fri Sep 28, 2007 5:59 pm

gimil wrote:save the file as a layered document, or a large file document i think its also called. This keeps the layer setting but without the need to open it wih only one graphic software

P.S. this should be moved to maps TTT

hm...what would be the suffix for the large file or layer document?
User avatar
Private 1st Class Koronna
 
Posts: 88
Joined: Wed Mar 28, 2007 6:49 pm

Postby gimil on Fri Sep 28, 2007 6:41 pm

filename.PSB
What do you know about map making, bitch?

natty_dread wrote:I was wrong


Top Score:2403
User avatar
Corporal 1st Class gimil
 
Posts: 8599
Joined: Sat Mar 03, 2007 12:42 pm
Location: United Kingdom (Scotland)

Postby Koronna on Fri Sep 28, 2007 6:51 pm

gimil wrote:filename.PSB

doesn't seem to work on Inkscape. Either saves it as filename.PSB.svg or cannot save file...and the file name extension list doesn't include layer or large file...
User avatar
Private 1st Class Koronna
 
Posts: 88
Joined: Wed Mar 28, 2007 6:49 pm

Postby gimil on Fri Sep 28, 2007 7:20 pm

Koronna wrote:
gimil wrote:filename.PSB

doesn't seem to work on Inkscape. Either saves it as filename.PSB.svg or cannot save file...and the file name extension list doesn't include layer or large file...


for photoshop its called a large document format
What do you know about map making, bitch?

natty_dread wrote:I was wrong


Top Score:2403
User avatar
Corporal 1st Class gimil
 
Posts: 8599
Joined: Sat Mar 03, 2007 12:42 pm
Location: United Kingdom (Scotland)

Postby Koronna on Fri Sep 28, 2007 8:51 pm

gimil wrote:
Koronna wrote:
gimil wrote:filename.PSB

doesn't seem to work on Inkscape. Either saves it as filename.PSB.svg or cannot save file...and the file name extension list doesn't include layer or large file...


for photoshop its called a large document format

alright...anyone have any idea how is it done one Inkscape?
User avatar
Private 1st Class Koronna
 
Posts: 88
Joined: Wed Mar 28, 2007 6:49 pm

Postby Wisse on Sat Sep 29, 2007 5:24 am

sorry if sayed before, but open it in photoshop and then press save as
Image Image
User avatar
Sergeant Wisse
 
Posts: 4448
Joined: Fri Oct 13, 2006 2:59 pm
Location: The netherlands, gelderland, epe

How to do this?

Postby FirefoxRocks on Wed Oct 03, 2007 5:16 pm

Sorry if this isn't the correct subforum to post this in

On the US Senate map, any idea how to make the area of Democrats/Republicans where there is a semi-circle of sub-divided sections? I have a map drawn on paper that has something similar, but instead it is an entire circle and sections are divided evenly.

I tried using the GIMP to draw circles, but GIMP doesn't even have a shape-drawing tool. I do not have Adobe Photoshop, although my school has Photoshop and I could ask if I could use it for "extra-curricular" projects.

I downloaded Inkscape but I have to spend some time learning that.

Is there a premade image of circles placed inside of circles (not a spiral). It would make the job a whole lot easier. Even if I can make a circle, I need circles inside of circles inside of circles (a total of 5 or 6 circles).

Can anyone tell me how to get started on this?
Corporal 1st Class FirefoxRocks
 
Posts: 15
Joined: Mon Jul 09, 2007 7:41 pm
Location: Ontario, Canada

Postby insomniacdude on Wed Oct 03, 2007 5:47 pm

Honestly, I have no idea. I just wanted to say that I highly approve of your screen name. It rocks power hard.
User avatar
Cadet insomniacdude
 
Posts: 634
Joined: Thu Nov 23, 2006 1:14 am

Postby Elijah S on Wed Oct 03, 2007 11:09 pm

Photoshop offers a free version online... try using the pen tool.
Sergeant 1st Class Elijah S
 
Posts: 672
Joined: Wed May 09, 2007 6:24 pm

Re: How to do this?

Postby DiM on Thu Oct 04, 2007 3:44 am

FirefoxRocks wrote:Sorry if this isn't the correct subforum to post this in

On the US Senate map, any idea how to make the area of Democrats/Republicans where there is a semi-circle of sub-divided sections? I have a map drawn on paper that has something similar, but instead it is an entire circle and sections are divided evenly.

I tried using the GIMP to draw circles, but GIMP doesn't even have a shape-drawing tool. I do not have Adobe Photoshop, although my school has Photoshop and I could ask if I could use it for "extra-curricular" projects.

I downloaded Inkscape but I have to spend some time learning that.

Is there a premade image of circles placed inside of circles (not a spiral). It would make the job a whole lot easier. Even if I can make a circle, I need circles inside of circles inside of circles (a total of 5 or 6 circles).

Can anyone tell me how to get started on this?


Use the ellipse select tool, and press Shift while clicking and dragging the mouse. Pressing Shift constrains the selection to be circular. Once you've selected a circular area, you can either stroke the selection with the current brush (Under "Edit->Stroke"), change the selection to a path, or fill the selection. It all depends on what you want to do with the circle.

also check the first post in this thread. you'll find there the help files for GIMP. download them and read.
“In the beginning God said, the four-dimensional divergence of an antisymmetric, second rank tensor equals zero, and there was light, and it was good. And on the seventh day he rested.”- Michio Kaku
User avatar
Major DiM
 
Posts: 10415
Joined: Wed Feb 14, 2007 6:20 pm
Location: making maps for scooby snacks

Postby FirefoxRocks on Thu Oct 04, 2007 8:01 am

Yes, that would be extremely helpful if I knew how to get the selection to be selected after I release the mouse button.

I already tried using that, but it won't stay selected.
Corporal 1st Class FirefoxRocks
 
Posts: 15
Joined: Mon Jul 09, 2007 7:41 pm
Location: Ontario, Canada

PreviousNext

Return to Tools & Guides

Who is online

Users browsing this forum: No registered users

cron